http://www.windowsitpro.com/authors/author/author/5777543/rsscomment/5777543en-USSun, 27 May 2012 07:32:46 GMTSun, 27 May 2012 07:32:46 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/setting-up-the-citrix-xml-service#commentsAnchorTue, 22 Apr 2008 02:45:44 GMT
where’s the rest of the article?]]>Siu OnTue, 22 Apr 2008 02:45:44 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/setting-up-the-citrix-xml-service#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorSat, 23 Dec 2006 04:27:22 GMT
Well, during this week I found several third party utilities which allow to print from DOS application under NT/2k/XP. For example look here: http://www.dosprn.com This utility is power and inexpensive.]]>SanomoSat, 23 Dec 2006 04:27:22 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorSun, 17 Dec 2006 11:44:00 GMT
I have the same problem. My printer is a Lexmark T630. It only uses a USB port. My program run in dos. It will not print as I cannot capture the usb port to print out my dos program. When I use a parallel port, it prints. I have no access to a parallel port now, I can only use a usb port. Can anybody some suggestions?]]>SanomoSun, 17 Dec 2006 11:44:00 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorMon, 05 Dec 2005 07:17:01 GMT
I have the same problem of using NET USE and my documents are printing as garbage. What did you do to resolve this?]]>susanMon, 05 Dec 2005 07:17:01 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorTue, 27 Sep 2005 04:44:42 GMT
how to display .pcx images in foxpro 2.5 or in 2.6 windows]]>bhatia4u Tue, 27 Sep 2005 04:44:42 GMThttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorFri, 22 Jul 2005 03:40:57 GMT
I need to print from our windows based software written in power builder on a dot matrix printer. Since we need the solution through which we can print condensed format on dos printer. how i can use any software of dos printing or command of dos printing in my software .please suggest me the solution. Aarti.]]>AartiFri, 22 Jul 2005 03:40:57 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/registry2/managing-printer-drivers#commentsAnchorWed, 13 Jul 2005 02:35:03 GMT
Yes there is, it is called Advanced Print Manager from DABCC.com. Take a peak at it and I think you will like what you see. It not only automates the process of creating mappings but it creates suggestions too. www.dabcc.com/apm ]]>Anonymous User Wed, 13 Jul 2005 02:35:03 GMThttp://www.windowsitpro.com/article/registry2/managing-printer-drivers#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorWed, 15 Jun 2005 19:20:25 GMT
In order to remove the printer configured using net use... do the following net use lptX /delete Replace X with 1 or 2 for LPT1 or LPT2.]]>Anonymous User Wed, 15 Jun 2005 19:20:25 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorSun, 12 Jun 2005 14:26:03 GMT
I have tested this trick (net use lpt1) with my DOS application. Unfortunately now my DOS program prints garbage instead of documents. Can anybody help me? ]]>Anonymous User Sun, 12 Jun 2005 14:26:03 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/installation2/installing-citrix-clients-without-user-interaction#commentsAnchorFri, 03 Jun 2005 11:38:00 GMT
you can also use the %Computername% variable: szEdit1=%Computername%]]>Anonymous User Fri, 03 Jun 2005 11:38:00 GMThttp://www.windowsitpro.com/article/installation2/installing-citrix-clients-without-user-interaction#commentsAnchorhttp://www.windowsitpro.com/article/installation2/installing-citrix-clients-without-user-interaction#commentsAnchorMon, 07 Feb 2005 12:17:11 GMT
you must have a space in between the quotes... szedit=" " for it to work]]>Anonymous User Mon, 07 Feb 2005 12:17:11 GMThttp://www.windowsitpro.com/article/installation2/installing-citrix-clients-without-user-interaction#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorSat, 01 Jan 2005 19:26:48 GMT
On the older workstations, running 98, I could add a network printer, choose to print MS-DOS programs and capture a printer port. I use ports 3, 4, 5, etc for different printers. How do you do capture a printer port when installing a network printer on a Windows XP machine? ]]>Anonymous User Sat, 01 Jan 2005 19:26:48 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorWed, 01 Dec 2004 12:47:49 GMT
When you are off the network you can install the MS Loopback adapter and you will have access to the NET commands.]]>Anonymous User Wed, 01 Dec 2004 12:47:49 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorWed, 10 Nov 2004 07:09:07 GMT
I was doing this same kind of mapping yesterday and when I got error 67 it was a typo. Try NET USE LPT1 \\printserver\printername /persistent:yes]]>Anonymous User Wed, 10 Nov 2004 07:09:07 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/delays-for-remote-terminal-services-users#commentsAnchorSun, 07 Nov 2004 16:45:12 GMT
This is incorrect. You should not modify the system.adm file becuase future SP could replace it thus loosing any modifications that are made. You should create a seperate ADM file.]]>Anonymous User Sun, 07 Nov 2004 16:45:12 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/delays-for-remote-terminal-services-users#commentsAnchorhttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorTue, 02 Nov 2004 22:22:11 GMT
I am working in foxprow 2.6 and install the crystal report 8 in my computer. I want to genrate report in foxprow throw crystal report, how i will include the command to call a crystal report in foxprow programme thanks ]]>zaheernasirTue, 02 Nov 2004 22:22:11 GMThttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorhttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorTue, 02 Nov 2004 22:22:11 GMT
I am working in foxprow 2.6 and install the crystal report 8 in my computer. I want to genrate report in foxprow throw crystal report, how i will include the command to call a crystal report in foxprow programme thanks ]]>zaheernasirTue, 02 Nov 2004 22:22:11 GMThttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorWed, 13 Oct 2004 06:33:43 GMT
Alejandra, I had the same problem with Win2000. I rebooted the laptop with it connected to the LAN and then used the net use command and the mapping worked. When I tried with out the connection to the LAN it failed with the error 67 just as you described. However, I need the ability to use the command when not connected to the LAN. Hope that helps. Lloyd - Oct 13, 2004]]>Anonymous User Wed, 13 Oct 2004 06:33:43 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorSat, 19 Jun 2004 09:21:54 GMT
I need to print from our windows based software written in vb on a dot matrix printer. Since we need the solution through which we can print condensed format on dos printer. printing need to be done on 80 col and 132 col. please suggest me the soltion. though i know that chr can be used for this but what actualy combination and there meaning with ascii values i dont know.]]>Ashish Bajaj Sat, 19 Jun 2004 09:21:54 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorWed, 16 Jun 2004 21:42:26 GMT
We have try to run Foxpro2.6 for DOS directly at a ChineseNT on Pentium P4. It seems can’t capture the keystroke. But if I press to swap the DOS prompt screen, the previous input keys can be successfully sent to Foxpro and displayed on the command window. The problem is I need every time when I input some characters. There is no such problem for English NT on P4 machine. Any hints? Thanks.]]>Ivy Wed, 16 Jun 2004 21:42:26 GMThttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorhttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorSat, 12 Jun 2004 09:31:38 GMT
Sir, i need your help, please:- on the topic:- That when i try to print in foxpro for windows using a DRAFT FONT, the gap between two lines is automatically increased equal to two spaces between the lines. I expect to get a DOS style print so, HOW CAN I.I would be grateful to receive your reply, THANKS IN CONSIDERATION,]]>Deepak Mittal Sat, 12 Jun 2004 09:31:38 GMThttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorhttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorSat, 12 Jun 2004 09:31:38 GMT
Sir, i would like to ask you that how i can run foxpro for windows on windows xp? thanks]]>Deepak Mittal Sat, 12 Jun 2004 09:31:38 GMThttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorhttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorSat, 12 Jun 2004 09:29:24 GMT
We are running foxpro 2.6a (dos) and now find the print time takes for ever spooling is off and print direct to printer in on (worked fin under win98 )we are running win2000pro and xphome. How can we get foxpro to actually print directly ??]]>Deepak Mittal Sat, 12 Jun 2004 09:29:24 GMThttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorhttp://www.windowsitpro.com/article/hardware/custom-application-problems#commentsAnchorWed, 02 Jun 2004 16:35:20 GMT
Essential reading for all terminal server developers / administrators.]]>Mal Gree Wed, 02 Jun 2004 16:35:20 GMThttp://www.windowsitpro.com/article/hardware/custom-application-problems#commentsAnchorhttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorSun, 09 May 2004 00:22:38 GMT
We are also facing the same problem encountered by Stephen Ericson. Are there any solutions??]]>RamakrishnaSun, 09 May 2004 00:22:38 GMThttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorhttp://www.windowsitpro.com/article/installation2/installing-citrix-clients-without-user-interaction#commentsAnchorWed, 05 May 2004 10:53:57 GMT
I have w2k machines. I have tried to create asetup.iss for the client install but the local machine will stil have the machine name of the initial setup machine. Have tried the szedit="" to no avail.]]>pat wood Wed, 05 May 2004 10:53:57 GMThttp://www.windowsitpro.com/article/installation2/installing-citrix-clients-without-user-interaction#commentsAnchorhttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorThu, 22 Apr 2004 10:46:17 GMT
Sir, i would like to ask you that how i can run foxpro for windows on windows xp? thnx]]>AdnanThu, 22 Apr 2004 10:46:17 GMThttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorThu, 15 Apr 2004 13:00:52 GMT
I tried, I used command net use lpt1:\\servername\epson/presistent:yes, but still can not success, show up system error 67 has occurred, the network name can not be found what’s the problem about the command thanks]]>AlejandraThu, 15 Apr 2004 13:00:52 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorWed, 07 Apr 2004 01:56:58 GMT
How to program for LPD&LPR,I want to write a program to be a lpr server to control the user to use printer? thank you]]>Jim Wed, 07 Apr 2004 01:56:58 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorWed, 10 Mar 2004 06:34:25 GMT
We are running foxpro 2.6a (dos) and now find the print time takes for ever spooling is off and print direct to printer in on (worked fin under win98 )we are running win2000pro and xphome . how can we get foxpro to actually print diectly ?? any help welcome.]]>stephen ericson Wed, 10 Mar 2004 06:34:25 GMThttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorhttp://www.windowsitpro.com/article/internals-and-architecture/mapping-client-drives-and-printers-with-rdp#commentsAnchorFri, 26 Dec 2003 21:29:52 GMT
Dave, Thanks for a very informative article. I followed the instructions for drive share. The client drives get automatically connected to z:, y:, x:, etc. Is there a way to ’shift’ the drive mappings to start at, say w:? Thanks, ]]>MarekFri, 26 Dec 2003 21:29:52 GMThttp://www.windowsitpro.com/article/internals-and-architecture/mapping-client-drives-and-printers-with-rdp#commentsAnchorhttp://www.windowsitpro.com/article/registry2/managing-printer-drivers#commentsAnchorSun, 30 Nov 2003 17:08:27 GMT
Excellent read, but surely by now there is a GUI utility to replicate printer drivers within a WTS environment? If there is, I’d like to know!]]>alexSun, 30 Nov 2003 17:08:27 GMThttp://www.windowsitpro.com/article/registry2/managing-printer-drivers#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorWed, 19 Nov 2003 11:00:13 GMT
i want to print under windows98, situation is that we are using networkcar and printer is configured on IP address,i dont want to share that printer and want print from DOS base application.. in winnt and 2000 there is a command "LPr... , i m able to print useing that command but i want solution for win98.. pls reply me.... ]]>AshishWed, 19 Nov 2003 11:00:13 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorMon, 17 Nov 2003 10:15:18 GMT
Sir, i need your help, please:- on the topic:- That when i try to print in foxpro for windows using a DRAFT FONT, the gap between two lines is automatically increased equal to two spaces between the lines. I expect to get a DOS style print so, HOW CAN I.I would be grateful to receive your reply, THANKS IN COSIDERATION, ]]>sharad agarwal Mon, 17 Nov 2003 10:15:18 GMThttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorhttp://www.windowsitpro.com/article/internals-and-architecture/fixing-server-farm-problems#commentsAnchorThu, 13 Nov 2003 13:58:43 GMT
I just completed building a new farm. It was relatively painless except for one server which failed to start IMA upon install, and rolledback (error 26005). This failed server shows up in the Server list of the Management Console, but not in the qfarm list. I tried to do a delte from the MC, I tried dscheck, nothing seems to do the job. Query Farm only shows my three good servers, but this fourth is really bothering me...Any ideas? I realzie that it may not be a big deal as long as it doesn’t show in Qfarm, but my naming convention is askew. Thanks?]]>Charles Steinberg Thu, 13 Nov 2003 13:58:43 GMThttp://www.windowsitpro.com/article/internals-and-architecture/fixing-server-farm-problems#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/limited-logon-scripts-for-terminal-servers#commentsAnchorFri, 07 Nov 2003 15:15:37 GMT
When establishing a citrix login on using example 1 I get the following error message "System error 1314 has occurred". Any suggestions? Thanks.]]>andrewFri, 07 Nov 2003 15:15:37 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/limited-logon-scripts-for-terminal-servers#commentsAnchorhttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorSun, 19 Oct 2003 10:36:52 GMT
I HAVE AN APPLICATION WRITTEN IN FOXPRO FOR DOS AND WOULD LIKE TO CONVERT IT TO VISUAL FOXPRO OR FOXPRO FOR WINDOWS WITHOUT CHANGING MY SOURCECODE. IS THIS POSSIBLE ?]]>RICHARD LAMONTAGNE Sun, 19 Oct 2003 10:36:52 GMThttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorhttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorFri, 17 Oct 2003 06:11:42 GMT
i want to know the compatibility of foxpro2.6 with windows Nt]]>zeeshanFri, 17 Oct 2003 06:11:42 GMThttp://www.windowsitpro.com/article/hardware/foxpro-for-windows-problems#commentsAnchorhttp://www.windowsitpro.com/article/installation2/installing-citrix-clients-without-user-interaction#commentsAnchorThu, 09 Oct 2003 09:13:05 GMT
You can also change the client name for citrix with a registry hack after the install. The key name is HKLM\SOFTWARE\Citrix\ICA Client\ClientName it is a string value.]]>John Talbert Thu, 09 Oct 2003 09:13:05 GMThttp://www.windowsitpro.com/article/installation2/installing-citrix-clients-without-user-interaction#commentsAnchorhttp://www.windowsitpro.com/article/internals-and-architecture/mapping-client-drives-and-printers-with-rdp#commentsAnchorTue, 29 Jul 2003 16:25:17 GMT
Is there a way to add printers to a Terminal Session from the Terminal Server when the User is using a pocket Pc. I have two terminal servers active, one primary the other backup, whenever the primary goes down the Pocket Pc user uses the backup but I have to logon as each user and remap thier net network printers is there a simpler way of doing this?...]]>everettTue, 29 Jul 2003 16:25:17 GMThttp://www.windowsitpro.com/article/internals-and-architecture/mapping-client-drives-and-printers-with-rdp#commentsAnchorhttp://www.windowsitpro.com/article/java/the-java-ica-client-and-drive-mapping#commentsAnchorFri, 14 Mar 2003 15:56:49 GMT
Good day Sir/Ma, I am very glad to discover a site like yours that really explain how to deal with java. My question is how can you transfer a written programme to the internet Thanks yours Faithfully ]]>OlusegunFri, 14 Mar 2003 15:56:49 GMThttp://www.windowsitpro.com/article/java/the-java-ica-client-and-drive-mapping#commentsAnchorhttp://www.windowsitpro.com/article/internals-and-architecture/mapping-client-drives-and-printers-with-rdp#commentsAnchorWed, 19 Feb 2003 09:48:38 GMT
Hi David, In your article, you mentioned that Drive Share tool can automatically makes client drives available within a client session by making a few registry changes. When I go to click on the registry hypertext link, I’m unable to find anything related to RDP drive mappings. Would it be possible for you to send me the information via e-mail? Thanks, ]]>Joseph Nguyen Wed, 19 Feb 2003 09:48:38 GMThttp://www.windowsitpro.com/article/internals-and-architecture/mapping-client-drives-and-printers-with-rdp#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorSat, 06 Apr 2002 15:02:25 GMT
the dos program uses lpt1 of the win2000server but the win2000server gives a ts00lpt1,prn locally. the dos application still uses the lpt1 of the printer and not the ts00x port. if i use a windows based program eveything its ok. when the dos based application tries to print nothing happend! i think a command like net use lpt1 :ts00x !! (if exists, for sure not). so?]]>SteliosSat, 06 Apr 2002 15:02:25 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/installation2/installing-citrix-clients-without-user-interaction#commentsAnchorWed, 27 Feb 2002 13:32:58 GMT
If you want the client to assign the netname of the locally installed workstation you will have to edit the .iss entry: szEdit="" The created .iss file will retain the netname of the original workstation that created the .iss file. This is a Citrix solution from their support web site.]]>brianWed, 27 Feb 2002 13:32:58 GMThttp://www.windowsitpro.com/article/installation2/installing-citrix-clients-without-user-interaction#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorMon, 18 Feb 2002 21:33:13 GMT
I am trying to get it to work also... If there is an easy way to get the TS session info passed to the script it should work... I am worthless at scripting, but I have heard it can be done with kix or vb! ]]>DavidMon, 18 Feb 2002 21:33:13 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/installation2/installing-citrix-clients-without-user-interaction#commentsAnchorFri, 15 Feb 2002 12:51:45 GMT
If your are deploying Windows XP and you need the Citrix ICA Client to be deployed silently, here’s the best way i’ve found. 1- download the ICA Client in MSI format from www.citrix.com/download (i used the 6.20.985 for Win32) 2- create a MST (MSI Transform) from the Citrix MSI with the settings you want distributed. I created my MST with Wise for Windows Installer. 3- create a shortcut with the command line : C:\WINDOWS\system32\msiexec.exe TRANSFORMS="Citrix-ICA Client-620-R1.mst" /i "ica32.msi" /qb 4- execute the shortcut on the station the way you want. This methode is perfectly working with ZEN/Novell 4.11sp9 and also with SMS. You can even push the command line in your login script if you want.]]>Jerome Pelland Fri, 15 Feb 2002 12:51:45 GMThttp://www.windowsitpro.com/article/installation2/installing-citrix-clients-without-user-interaction#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/limited-logon-scripts-for-terminal-servers#commentsAnchorSun, 03 Feb 2002 06:37:43 GMT
We have a check on the server-name, since we only have three metaframe-servers in our farm. if "%computername"=="ts_name1" GOTO METAFRAME if "%computername"=="ts_name2" GOTO METAFRAME REM Running on a local machine net use w: \\appserver\programs GOTO END :METAFRAME net use w: \\appserver\programs :END]]>Jan Rune Bjørkeng Sun, 03 Feb 2002 06:37:43 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/limited-logon-scripts-for-terminal-servers#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorWed, 29 Aug 2001 19:41:09 GMT


i try use command net use lpt1:\\servername\epson/presistent:yes, but still can not success, show up system error 67 has occurred, the network name can not be found what’s the problem about the command
thanks/regards
]]>firmansyah Wed, 29 Aug 2001 19:41:09 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/internals-and-architecture/mapping-client-drives-and-printers-with-rdp#commentsAnchorWed, 27 Jun 2001 18:21:07 GMT
You can map network printers when using RDP. The trick is to install this printer as local on your PC and use a NET USE to map it to a network resource. This and other common printing issues under RDP are explained (with explanations on how to fix them) on the article I wrote and posted on the newsgroups many times.]]>Cláudio Rodrigues Wed, 27 Jun 2001 18:21:07 GMThttp://www.windowsitpro.com/article/internals-and-architecture/mapping-client-drives-and-printers-with-rdp#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorThu, 22 Mar 2001 15:23:25 GMT
If you use the net use lpt1 command to allow printing from dos programs to a network printer, how would you turn it off from a workstation which has its own printer attached to lpt1? This is what I did..net use lpt1:\\server\hpIII. Now the other workstation with its own hpIII attached will only print to the network, and not to its own local printer.]]>Chuck Heath Thu, 22 Mar 2001 15:23:25 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/hardware/configuring-home-and-root-drives-correctly#commentsAnchorThu, 28 Dec 2000 00:25:41 GMT
This doesn’t work under Windows 9x!!! I was looking for a way to map home directories in Win9x, please help.]]>Brian S Thu, 28 Dec 2000 00:25:41 GMThttp://www.windowsitpro.com/article/hardware/configuring-home-and-root-drives-correctly#commentsAnchorhttp://www.windowsitpro.com/article/installation2/compaq-insight-manager-and-citrix-metaframe#commentsAnchorFri, 08 Dec 2000 09:06:46 GMT
I successfully installed the agents along with Compaq Supprot Paq Software for Windows NT 4.0 v1.01.]]>Bill Winslow Fri, 08 Dec 2000 09:06:46 GMThttp://www.windowsitpro.com/article/installation2/compaq-insight-manager-and-citrix-metaframe#commentsAnchorhttp://www.windowsitpro.com/article/file-systems/installing-odbc-on-a-tse-server-with-metaframe#commentsAnchorFri, 13 Oct 2000 10:04:46 GMT
In reply to this article, what denies a nonadministrator (e.g. domain user) from accessing the ODBC data sources icon in the Control Panel in TSE Server. The error message encountered is notes "ODBC can’t load the resource \WINNT\SYSTEM32". What denies the nonadministrator access to this? Thanks.]]>Richard Canadinha Fri, 13 Oct 2000 10:04:46 GMThttp://www.windowsitpro.com/article/file-systems/installing-odbc-on-a-tse-server-with-metaframe#commentsAnchorhttp://www.windowsitpro.com/article/hardware/setting-up-sna-windows-nt-client-and-tse#commentsAnchorThu, 14 Sep 2000 12:58:01 GMT
I WANT INFORMCION ON THE CONNECTION WITH THE CARD EICO, PLEASE]]>william guzman Thu, 14 Sep 2000 12:58:01 GMThttp://www.windowsitpro.com/article/hardware/setting-up-sna-windows-nt-client-and-tse#commentsAnchorhttp://www.windowsitpro.com/article/hardware/creating-a-special-tse-logon-script#commentsAnchorWed, 02 Aug 2000 22:59:55 GMT
Ok I have this problem, But What Should the TSLO.CMD look like ?? I need to see a script ??? Thank You ?]]>BUDDYWed, 02 Aug 2000 22:59:55 GMThttp://www.windowsitpro.com/article/hardware/creating-a-special-tse-logon-script#commentsAnchorhttp://www.windowsitpro.com/article/firewalls3/published-ica-applications#commentsAnchorTue, 30 May 2000 07:48:34 GMT
Very good article indeed. Clearly explained and very useful as a reference. Good job.]]>Jack Raskis Tue, 30 May 2000 07:48:34 GMThttp://www.windowsitpro.com/article/firewalls3/published-ica-applications#commentsAnchorhttp://www.windowsitpro.com/article/firewalls3/published-ica-applications#commentsAnchorWed, 24 May 2000 22:40:25 GMT
Excellent article! The best coverage of ICA through firewalls that I’ve seen, with a very helpful suggestion about different ports for the same external address. didn’t mention the problem that you get if you don’t want to run UDP through the firewall at all though. That would have been nice. ]]>Chris Bye Wed, 24 May 2000 22:40:25 GMThttp://www.windowsitpro.com/article/firewalls3/published-ica-applications#commentsAnchorhttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorSat, 29 Apr 2000 11:41:55 GMT
Great technology! Now figure out a way to "net use LPT1: %localdefaultprinter%" where localdefaultprinter is the local machine default windows printer. This can be done manually but Win2000 administrators need a way to do in in logon scripts.]]>Bill Chaffin, MCSE Sat, 29 Apr 2000 11:41:55 GMThttp://www.windowsitpro.com/article/terminal-server-and-services/dos-printing#commentsAnchorhttp://www.windowsitpro.com/article/internals-and-architecture/publishing-an-access-based-application-on-the-internet#commentsAnchorTue, 18 Apr 2000 13:51:42 GMT
The title of the article is somewhat misleading. Pretty much the entire article is devoted to ’tweaking’ the application. It’d been nice to know what was being discussed here, generally speaking. What is an .ica file, etc. I navigated to this article expecting to read about how to ’Publish an Access-Based Application on the Internet’. Thanx.]]>Frank Shultz Tue, 18 Apr 2000 13:51:42 GMThttp://www.windowsitpro.com/article/internals-and-architecture/publishing-an-access-based-application-on-the-internet#commentsAnchorhttp://www.windowsitpro.com/article/internals-and-architecture/publishing-an-access-based-application-on-the-internet#commentsAnchorTue, 18 Apr 2000 00:18:13 GMT
This works well , with the ICA client. We have found that we can add double security to an MSAccess app by setting up Access security to the App and then publishing the app exclusively to each remote user. We create a separate shortcut for each user profile. It a remote user logs in with the login and password, he still cannot run the shortcurt to the app. Each view of the tables is restricted through the Access security. This is great for a remote sales force. Citrix is really heating things up .]]>CURTISTue, 18 Apr 2000 00:18:13 GMThttp://www.windowsitpro.com/article/internals-and-architecture/publishing-an-access-based-application-on-the-internet#commentsAnchorhttp://www.windowsitpro.com/article/installation2/compaq-insight-manager-and-citrix-metaframe#commentsAnchorMon, 06 Mar 2000 21:21:08 GMT
I think the article is mis-leading. First it’s discussed how it’s not needed to install the monitoring portion of Insight Manager, because monitoring can be done from another computer. Then you preceed to describe how to install the monitoring piece. I believe what was being asked was how to safely install the Insight agent on each of the Citrix servers, so they could be monitored by another computer in the Operations Center. So, the article should either describe only what is required for installing the agent. Or clearly seperate the two installations. Each having their own specific instructions for installing on a Citrix server.]]>T Kettler Mon, 06 Mar 2000 21:21:08 GMThttp://www.windowsitpro.com/article/installation2/compaq-insight-manager-and-citrix-metaframe#commentsAnchorhttp://www.windowsitpro.com/article/installation2/compaq-insight-manager-and-citrix-metaframe#commentsAnchorFri, 18 Feb 2000 12:26:47 GMT
I work in a terminal server and metaframe enviroment. We do use compaq equipment with insight manger. i found this information very useful.]]>Cornell Reese Fri, 18 Feb 2000 12:26:47 GMThttp://www.windowsitpro.com/article/installation2/compaq-insight-manager-and-citrix-metaframe#commentsAnchorhttp://www.windowsitpro.com/article/installation2/installing-citrix-clients-without-user-interaction#commentsAnchorMon, 24 Jan 2000 12:23:07 GMT
Found this article to be very timely and accurate. Followed the procedures and it worked well. However, using the silent install method via diskettes the procedure would not prompt for the second diskette so it always failed. Is there anyway to allow it to go to the second diskette? Thanks]]>Jim Shank Mon, 24 Jan 2000 12:23:07 GMThttp://www.windowsitpro.com/article/installation2/installing-citrix-clients-without-user-interaction#commentsAnchorhttp://www.windowsitpro.com/article/hardware/fixing-blank-buttons-on-the-metaframe-toolbar#commentsAnchorMon, 27 Dec 1999 20:57:46 GMT
Great timing! You folks at WinntMag are ALWAYS coming up with the right thing at the right time for me! It’s almost like you are able to read my mind sometimes!!! Thank you!]]>Mark J. Scott Mon, 27 Dec 1999 20:57:46 GMThttp://www.windowsitpro.com/article/hardware/fixing-blank-buttons-on-the-metaframe-toolbar#commentsAnchor