Subscribe to Windows IT Pro

 

Get Newsletters

  • Get the Latest News
  • Product Updates
  • Helpful Tricks
  • Productivity Tips

Subscribe Now!

May 13, 2004 12:00 AM

Serious Vulnerability in 802.11b and 802.11g Networks

Windows IT Pro
InstantDoc ID #42673
Rating: (0)

The Australian Computer Emergency Response Team (AusCERT) released an advisory about a newly discovered denial of service vulnerability in 802.11 wireless networks.

Access points broadcast on a given channel and frequency. The DoS condition can be caused by exploiting the Clear Channel Assessment (CCA) procedure used by 802.11 equipment rendering a condition where the channel appears to be busy. Under such conditions all access points and client stations would defer their transmissions waiting for the channel to appear idle. However and idle condition would not ensue until the DoS attack ceased.

The problem affects all 802.11 wireless gear that uses the a Direct Sequence Spread Spectrum (DSSS) physical layer including 802.11b and low speed 802.11g. The vulnerability does not affect 802.11a and high speed 802.11g devices.

AusCERT said there is no defense against such an attack, and determining the location of the attacker would be difficult.

Since wireless networks are radio transmitters and receivers they are subject to radio interference on their respective frequencies. Therefore relying on wireless network technology for mission critical environments might prove to be more of risk than is necessary

Related Content:

ARTICLE TOOLS

Comments
  • mickc
    8 years ago
    May 31, 2004

    i have read a lot of these articles and it would appear that a great many people are not shooting at the whole target. like so many spread spectrum and multi hopping carrier radios the 802*** devices are subject to co channel interference but not altogether from other similar low power devices. in australia, as with other countries these devices are allocated carrier space in the ism (industrial, scientific, medical)band as mandated by governments etc. in this band as legislated any transceiver device must accept any incoming carrier/signal interference and must not cause the same to other devices deployed in the field. lets look at where these bands sit, firstly 2.4ghz, right in the middle of the ham radio band (ham television to be more precise) now, what do think happens to any reciever when it gets pounded with up to a 7 meg carrier which can carry 5 meg of analog video not to mention the sound carriers and other information crunched in there as well, now add to that eirp of up to 5 kilowatts and bingo presto no more viable link, bear in mind that the ham access also extends into the 5.8 band with similar permissions for output power so i think it's time for manufacturers to get the hint that an open piece of radio spectrum is not a marketing tool and will always lead to a free for all eventually rendering the selected spectrum almost completely usless. and it's not the ham operators fault either, they were here far longer then the new developing technology so the only word that comes to mind regulation. anyone else agree?mc

You must log on before posting a comment.

Are you a new visitor? Register Here

advertisement

advertisement

White Papers

Get your Windows 7 deployment off to the right start by implementing PC lockdown. A locked-down environment is easier and cheaper to support since users are less likely to make unnecessary changes to the core system configuration - read more here!

Essential Guides

Is your iSCSI "lossy"? The reality is that most off-the-shelf Ethernet hardware deployed for iSCSI can lose packets, resulting in slow performance or application downtime. Learn how to assess your current iSCSI infrastructure and engineer an advanced iSCSI SAN infrastructure.

Web Seminars

What's the best way to keep your network safe from malware? In this web seminar, security expert Greg Shields suggests an alternative method to the traditional blacklisting approach that is common with anti-virus and anti-malware solutions.

eLearning Series

We bring the experts direct to you to share their real-world perspective and expertise. During each event, three sessions stream in real time, so you can learn, ask questions, and get solutions.
Upcoming event: Getting the Most with Exchange 2010 with Paul Robichaux

Subscribe to Windows IT Pro!

Windows is a trademark of the Microsoft group of companies. Windows IT Pro is used by Penton Media Inc. under license from owner.