Have you ever needed a simple way to expand a drive that's quickly running out of space? Windows 2000's support for junction points can be the solution.
Junction points originated as a solution to the problem of needing more than 26 drive letters. If you wanted to install more than 26 drives in Windows NT, you were stuck after you used Z—you were out of letters. Junction points let you install 27 (or more) drives. After you install your 27th drive, the new drive sits in Logical Disk Manager (LDM), formatted and ready to use but basically inaccessible because Win2K has no name to give it. To make the drive accessible, you can use junction points to make the drive look like a directory on an existing volume. After you create a directory (e.g., C:\extradrive) on an existing drive, you connect your unnamed drive to C:\extradrive (I explain how later in this article). From that point on, writing data to C:\extradrive puts the data on a different physical drive than writing data to C:\winnt.
The missing piece in this procedure is how you "glue" the letterless drive to the directory—that is, what you call the drive. Every drive has a globally unique identifier (GUID). You use the drive's GUID and a standard Win2K command called Mountvol to hook up the drive to the directory. A typical Mountvol command might look like
mountvol C:\extradrive
\\?\Volume{47c8cd01-1a1f-11d5-aa7f-806d6172696f}\
But as I mentioned earlier, you can also use junction points to expand a drive. For example, if you've ever set up a server for a group of printers or for users who print long documents, you know that users write amazingly large quantities of data to spool files. Win2K temporarily queues printer spool files in \winnt\system32\spool\printers. The OS is also in that directory, so you definitely don't want that directory's drive to fill up.
Suppose that directory is on the C drive and you happen to have an E drive that has plenty of space. First, stop the Spooler service and clean out the C:\winnt\system32\spool\printers directory. Then, reparse the E drive to C:\winnt\system32\spool\printers. Restart the Spooler service and—voilà—no more filled-up system drive.
The one wrinkle in this approach is finding the GUID for drive E. Mountvol can tell you the GUID, but wouldn't you rather simply type something like
linkd C:\winnt\system32\spool\printers E: